Optional equipment

TwinTrac

The second generation TwinTrac features a new location for the tiltable steering column and HiTech transmission control. Because the armrest with tractor terminal is standard on Advance models, it is also used as an info display and control for the hydraulics. In HiTech models the info display is located on the right pillar of the cab. Note: For safety reasons it is recommended that the maximum driving speed should be 10 km/h using the reverse drive controls.

Forestry cab

Valtra also offers the option of a forestry cab, featuring a protective cage around the roof, super strong and large polycarbonate glass, and an extra window above. Three other windows increase further visibility. A Valtra T series tractor equipped with the forestry cab and TwinTrac reverse drive system is an unbeatable combination for forestry contracting work.

Front PTO and linkage

Front linkage is factory-fitted on the production line and is available with front PTO (1000 rpm) if required. The lift capacity of the front linkage is 3,500kg or 5,000 kg as an option for Versu and Direct models.

Front axle suspension can be fitted together with the front PTO and linkage. Using implements attached to both ends of the tractor significantly increases working efficiency and productivity.

Aires – front axle suspension

Valtra’s hydro pneumatic front axle suspension significantly increases driving comfort on roads or in the field, either operating with trailers or mounted equipment, allowing fast, safe and comfortable journeys across a variety of terrain and surfaces. On field work the front suspension can significantly increase pulling efficiency.

Cab suspension

Cab suspension is a useful option giving increased driving comfort. Combined with the low-frequency driver’s seat and the quiet cab, the driving experience is on a level of that of a passenger car. Cab suspension is a perfect match with the Aires front axle suspension.

Valtra ISOBUS - controlling implements is easier than ever

ISOBUS is a standardised system for communicating and sharing data between the tractor and implement. A Virtual Terminal inside the cab is used to control implements, display input data and save information. ISOBUS makes it easy to control modern implements, especially those with many features and a high level of automation. The number of ISOBUS implements on the market is increasing rapidly.

Valtra front loaders

Factory-fitted
Valtra front loaders are fitted at the factory and are designed to be compatible with Valtra tractors and equipment. The range of front loaders features a new design, strong construction, and a long list of improvements to boost output.

Depending on the model of tractor, the front loader can be controlled using either the electronic proportionally controlled joystick on the armrest or with a mechanically operated ErgoDrive control.

Valtra is the only tractor manufacturer to fit front loaders to its tractors on the factory production line.

Automatic steering unit

The T Series models T183-T213 are available with factory installed automated steering readiness, or with System 150, a comprehensive autopilot based on satellite radio determination capable of steering the tractor with great precision – to within a very few centimetres.