Third Generation N Series

Third Generation N Series

Valtra’s new N Series provides a clear view – not just for the driver from the cab, but also in terms of future investments. Whereas a six-cylinder tractor was once required to perform heavy tasks and provide peace of mind for its owner, the N Series demonstrates how improved productivity can be achieved with new technology and a state-of-the-art four-cylinder tractor.

Now less (cylinders) is more (productivity). The most powerful model in the N Series, the N163, produces up to 700 Nm of torque and 171 horsepower.

The brand new front-end design of the N Series makes it a compact tractor ideal for front-loader work.

Model

Type

Max. power hp (kW) *

Max. torque Nm*

N163

Versu, Direct

171 (126)

700

N143

HiTech, Versu, Direct

160 (118)

650

N123

HiTech, HiTech 5

143 (105)

560

N113

HiTech, HiTech 5

130 (96)

530

* ISO 14396

Efficient comfort: new HiTech 5 transmission option

Efficient comfort: new HiTech 5 transmission option

Driving a Valtra is now easier and more comfortable than ever.

The new HiTech 5 models feature a five-step powershift transmission. Shifting between the main gears is robotised, so no gear lever is required.

All transmission functions are controlled via pushbuttons on an ergonomically located fixed lever.

More about HiTech 5 models

Smooth direction changes

HiTech 5 models can be equipped with the optional Valtra HiTrol turbine clutch. HiTrol makes continuous start/stop operations (e.g. front loader work), extremely smooth even under heavy load.

In combination with the various automated transmission features, operating this tractor could not be more comfortable.


 

Concentrate on the work not on gears

HiTech 5 models offer a versatile range of automated transmission features that greatly improve the driver's work especially when a lot of shifting is required.

  • The Auto 1 and Auto 2 powershift programmes change gear automatically when engine speed goes above or falls below a rpm preset by Valtra or the driver. The Speed Matching feature will automatically select the correct powershift speed to suit the situation immediately - even in reverse. The kick-down function speeds up shifting. When the accelerator pedal is pressed down fast, the system will temporarily shift down to a lower gear (when the system allows).

  • Autotraction automatically disengages the drive when the driver presses the brakes at less than 10 km/h or when the engine speeds drops below 1000 rpm. When the engine speed increases above 1000 rpm or the brake pedal is released, the drive engages smoothly.

  • Cruise Control allows the driver to set the desired driving speed or PTO speed. The pre-set speed is maintained automatically regardless of changes in load.

 

Reliable HiTech hydraulics

The open-centre hydraulics are the same as those on other HiTech models and are controlled by a mechanical lever. A 73-litre/minute hydraulic pump comes as standard, with a 90-litre pump available as an option.

HiTech 5 models can be specified with up to 4 hydraulic valves in the rear and 2 valves in the front.

3rd Generation N Series Testimonial

“The new frame design makes the N Series the most agile tractor I have ever driven”

 

Benefits

Benefits for you

  • Outstanding agility, also in front loader work
  • New design for excellent visibility
  • Cost savings thanks to 5-10% fuel savings
  • Reliable, high performance thanks to thewell-proven AGCO Sisu Power engine and Valtra transmission
  • Excellent operator comfort and safety
  • Individually yours:  specify exactly the right tractor for your needs

Valtra à la carte options

The comprehensive Valtra à la Carte system makes customizing your individual tractor easy, while offering up to half-a-million unique combinations of performance characteristics and equipment.

Here are some unique Valtra features that improve the productivity of the third generation N Series. Contact your local Valtra dealer for a full overview of available options.

SVC cab

The five-pillar SVC cab offers unrivalled visibility in all directions. It is now available on Versu and Direct models in addition to HiTech models.

Forest cab

For extra visibility and safety during forest operation the new N Series models can be equipped with a forestry cab. The cab features a protective cage around the roof, super strong and large polycarbonate glass, and an extra window above.

Valtra LHLink

The new N Series models can also be equipped with the Valtra LHLINK pivoting front linkage.

 

TwinTrac

With TwinTrac reverse drive controls the tractor can also work backwards. The working direction can be changed without leaving the driver’s seat.

HiTrol turbine clutch

The HiTrol turbine clutch ensures smooth operation during tasks that require frequent stopping and starting such front-loader work. HiTrol is available as an option on N113 and N123 HiTech and HiTech 5 models.

Auto-Steering

The Versu and Direct models N143 and N163 are available with a new factory-fitted Auto-Steering readiness or the complete System 150 Auto-Steering package, which can steer the tractor with an accuracy of just a few centimetres.

AGCOMMAND Telemetry

The factory-fitted AGCOMMAND satellite navigation system allows the location, current task, productivity and servicing requirements of the tractor to be monitored over the internet.

Maximized fuel efficiency

Maximized fuel efficiency

Valtra’s range of SCR tractors now extends to the new N Series.

For tractor users SCR technology is simple, as electronics take care of the system. The driver’s only task is to fill the AdBlue tank.

In SCR engines the combustion of fuel is optimised, as the latest technology ensures always the best efficiency. The new tractor models offer even more power and torque.

How you benefit from SCR technology

SCR engine technology reduces fuel consumption by approximately 5-10 percent. In addition, the particulate and nitrogen oxide emissions are reduced to a fraction compared to the previous technology.

Tractor users also benefit from the fact that the SCR technology reduces the need for engine cooling and keeps the lubrication oil cleaner, which extends the engine life.

Valtra has years of experience with SCR technology. The Valtra S Series introduced in 2008 was the first agricultural tractor in the world to feature SCR technology.

Background story

Background story

Valtra engineers talk about the development of the third generation N Series tractors.

Watch the video

 

Features

More power and torque, further improved visibility, extreme agility for front loading work and a range of unique options that allow you to custom-build the most productive tractor for your needs.

Discover the features that make the N Series the strongest 4-cylinder range on the market.

Background story

Background story

Valtra engineers talk about the development of the third generation N Series tractors.

Watch the video

 

Technical specifications

 

N113
HiTech

N113
HiTech 5

N123
HiTech

N123
HiTech 5

N143
HiTech

N143
Versu

N143
Direct

N163
Versu

N163
Direct

ENGINE 44AWI 44AWI 44AWI 44AWI 49AWI 49AWI 49AWI 49AWI 49AWI
Number of cylinders/volume l 4 / 4.4 4 / 4.4 4 / 4.4 4 / 4.4 4 / 4.9 4 / 4.9 4 / 4.9 4 / 4.9 4 / 4.9
POWER hp (kW) @ r/min (ISO 14396) 2000 2000 2000 2000 2000 1900 1900 1900 1900
Max. power 124 (91) 124 (91) 135 (99) 135 (99) 152 (112) 152 (112) 152 (112) 163 (120) 163 (120)
Max. power with boost 130 (96) 130 (96) 143 (105) 143 (105) 160 (118) 160 (118) 160 (118) 171 (126) 171 (126)
TORQUE Nm @ 1500 r/min                  
Max. torque 510 510 540 540 600 600 600 650 650
Max. torque with boost 530 530 560 560 650 650 650 700 700
TRANSMISSION PS3 PS5 PS3 PS5 PS3 Versu Direct Versu Direct
Speeds* 36+36R 30+30R 36+36R 30+30R 36+36R 30+30R CVT 30+30R CVT
Speeds min-max at std. engine revs** 0.6-50 0.8-50 0.6-50 0.8-50 0.6-50 0.6-50 0-50 0.6-50 0-50
2-SPEED PTO                  
540, engine r/min 1874 1874 1874 1874 1874 1874 1874 1874 1874
540e, engine r/min 1539 1539 1539 1539 1539 1539 1539 1539 1539
1000, engine r/min 2000 2000 2000 2000 2000 2000 2000 2000 2000
Ground speed PTO option option option option option option option option option
Front PTO, engine r/min (option) 1920 1920 1920 1920 1920 1920 1920 1920 1920
HYDRAULICS                  
Max. pump output, litres/min 73(90) 73(90) 73(90) 73(90) 73(90) 115(160) 115(160) 115(160) 115(160)
Max. no. of valves rear/front 4/2 4/2 4/2 4/2 4/2 4/3 4/3 4/3 4/3
Hydraulic oil available for implements, l 40 40 40 40 40 47 47 47 47
REAR LINKAGE                  
Max. lift capacitiy, kN 77 77 77 77 77 81 81 81 81
Max. lifting range, mm 700 700 700 700 700 700 700 700 700
Front lift capacity, kN 35 35 35 35 35 35 35 35 35
WEIGHT AND MEASURES 460/85R38+380/85R28 520/85R38 + 420/85R28
Wheebase, mm 2665 2665 2665 2665 2665 2665 2665 2665 2665
Length, mm 4664 4664 4664 4664 4664 4664 4664 4664 4664
Width, mm 2538 2538 2538 2538 2538 2538 2538 2538 2538
Height, mm 2875 2875 2875 2875 2875 2945 2945 2945 2945
Turning radius, m 4,5 4,5 4,5 4,5 4,5 4,5 4,5 4,5 4,5
Ground clearance rear axle, mm 480 480 480 480 480 550 550 550 550
Weight (full tanks), kg *** 5200 5200 5200 5200 5200 5450 5450 5600 5600
Fuel tank, l 230 230 230 230 230 230 230 230 230
AdBlue tank, l 27 27 27 27 27 27 27 27 27

*) incl. creeper speeds as an option
**) max. speed depending on country specific legislation
***) 150 kg more with suspension

Video

Gallery

Background story

Background story

Valtra engineers talk about the development of the third generation N Series tractors.

Watch the video